Embossed Honeycomb Stainless for Elevator Doors: MOQ 1 Sheet, 48-Hour Sampling

Looking to upgrade elevator doors without paying for costly press tooling? Our 6 kW fiber laser now embosses honeycomb cells up to 0.4 mm deep on mirror, hairline or PVD black stainless—MOQ starts at one 1219 × 2438 mm sheet and samples ship in 48 hours.

Why Honeycomb?

• Tech aesthetic: 6 mm hex grid hides finger smudges and minor scratches better than random brush.

• Light play: Each cell acts like a micro-reflector, giving passengers a subtle “moving light” effect as the lift travels.

• Weight neutral: Depth 0.4 mm adds only 90 g/m²—no impact on door balance or motor amps.

48-Hour Sampling Workflow

Standard & Custom Sizes

• Stock sheet: 1219 × 2438 mm (4 × 8 ft) | 0.7 – 1.2 mm thickness

• Hex cell: 6 mm flat-to-flat (default) or 4 mm / 8 mm on request

• Surface base: mirror, hairline, PVD black, PVD gold

Cost Snapshot (per m², FOB Shenzhen)

Door Fabrication Tips

• Allow 5 mm un-embossed border for welding flanges—laser skips programmed zones.

• Use 316L base for coastal lifts; honeycomb depth does NOT affect corrosion resistance (ASTM B117 1000 h passed).

• Apply PET laser-protective film post-emboss to keep cells dust-free during transit.